hiltsourcing.blogg.se

1. Cisco putty download software download#
2. Cisco putty download install#
3. Cisco putty download serial#
4. Cisco putty download driver#

If a User Account Control warning appears, click Allow - I trust this program to proceed.

Cisco putty download install#

The Ready to Install the Program window appears. The Cisco Virtual Com InstallShield Wizard begins. Windows, double-click the setup(圆4).exe file in the Windows_64 folder.

Cisco putty download software download#

However for added functionality,ĭownload the USB Console Software from the Software Download Center forĬatalyst 3850 Series Switches at .ĭouble-click the setup.exe file in the Windows_32 folder. Windows 10 includes a USB to RS232 driver.

Cisco putty download driver#

You can download the driver file from the site for downloading the switch software. Obtain the Cisco USB console driver file from the web site and unzip it. Installing the Cisco Microsoft Windows USB Driver Procedure Installing the Silicon Labs Windows USB Device Driver.

Installing the Cisco Microsoft Windows USB Driver.Installing the Cisco Microsoft Windows USB Device DriverĪ USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB console port on

Terminal displays the bootloader sequence. Switch as described in the switch getting started guide. Mini-B (5-pin-connector) USB console port.īaud rate and character format of the PC or terminal to match the console port Connect the other end of the cable to the switch See USB Type A Port section.Ĭable to the PC USB port. USB Type A port on the switch provides file system support and is NOT a console port.

Cisco putty download serial#

Once the installation is completed, a virtual COM port session, "tty.SLAB_USBtoUART", will be started.ĭo not use the generic USB serial driver available on the Mac-based PC. you can download the USB driver from the Silicon Labs website. you can either download the USB driver from the Silicon Labs website or see Installing the Silicon Labs Windows USB Device Driver.įor Cisco USB Device, no driver installation is required.įor Silicon Labs USB Device. To install the USB driver to a Windows-based PC or Mac-based PC for the first time, do the following.įor Cisco USB Device, see Installing the Cisco Microsoft Windows USB Device Driver.įor Silicon Labs USB Device. Silicon Labs CP210x USB to UART Bridge or CP2102N USB to UART Bridge On the Windows-based PC, open the Device Manager or on the Mac-based PC, open the System Report and view the following: To identify which USB deviceĬonnect a USB cable from the Windows-based PC or Mac-based PC to the USB console port. The Cisco Catalyst 9300 Series Switches will either have the Cisco USB Device or Silicon Labs USB Device (CP2102N). The PC or terminal displays the bootloader sequence. The program,įrequently a PC application such as Putty or TeraTerm, makes communicationīetween the switch and your PC or terminal possible.Ĭonfigure the baud rate and character format of the PC or terminal to match the Start the terminal-emulation program on the PC or the terminal. Connect the other end of the cable to the switch console port. Serial port on the terminal server or your PC using the optional RJ45-to-DB9Īdapter cable.

YouĬan initially configure the entire stack from any member switch.Ĭonnecting the RJ45 Console Port Procedure Switches, connect to the console port of one of the switches in the stack. In the guide, go to Configuring the Switch Using the Web User Interface.Ĭonfiguring the Switch Using the CLI Accessing the CLI Through the Console PortĬonfigured or unconfigured switch by connecting the RJ-45 console port or USBĬonsole port of the switch to your PC or workstation and accessing the switch